You guys know how much we love statement walls here at SpG (you can see all the previous walls !), but it occurred to me recently that we haven’t done a wall with paint pens or markers yet. I know, I know; shame on us and all of that, but don’t yell too hard because I’m about to share one with you today. My musician husband Todd has a music room in our house where he can practice, write, and record, but until lately it’s been dubbed the most boring room of the house. He insisted on keeping a giant couch (that he’s had for the last 13 years!) in the space, and it felt like it was literally taking up half the small room, so I never really put much effort into decorating it. Once he decided to move the couch to his off-campus studio space, I jumped at the chance to add some personality to his room, and I thought a statement wall recreating would be just the ticket for the space. Since the walls are a medium grey color, I decided that a stenciled wall design with a white paint pen would work out perfectly. Here’s how I did it:
-scrap cardboard (just ask a local store for boxes if you don’t have any; the bigger the better!)
-thick white paint pen ( one and one are good)
-push pins to hold template on wall
First I decided how many rows of the pattern I wanted on the wall. Once I chose four rows I measured the wall height, marked the four section measurements on both ends of the wall with a pencil, and used painter’s tape to mark off the rows.
Once I figured out the height, I got a big piece of cardboard, cut it to the row height, and traced my shape across the cardboard as far as it would go. I alternated the shape orientation so that it would look like an interlocking pattern once all together. Keep the shapes that get cut out of your template since you’ll need those in your final step.
I used push pins to secure the template to the wall so I could trace without having to hold the giant template in place. Pay attention to where the middle of the wall is, and make sure that you have the middle of a shape line up exactly in that spot. If you line up the middle carefully, the outside edges of the wall will both end at the same point in your pattern.
Taking the paint pen, I just traced inside of the shapes and allowed the paint to dry (which it does rather quickly) before going over it a second time. If you have a lot of corners to get into like I did, I would also use a smaller point of paint pen as well so you can get into the corners a little better.
Once you have completed all your outline shapes for that section, remove the push pins and move the template over. Make sure to overlap the first shape of the template with the last shape you traced so that your spacing will be the same throughout. Since it can be hard to get the big template to line up exactly with the ends of the wall, you can use the leftover cardboard shapes that you originally cut from your template for this final step. Trim the cutouts vertically as needed and to use them as smaller templates to complete your shapes right next to the corner wall seam. Once your shapes are all traced, you’re done!
The wall only took me a couple of hours to complete, so I was pretty happy with how fast it went, and since I was able to use one paint pen (well, one thick pen and one thin pen for the corners) for the whole wall, the project only cost me around $10 too! Not bad if you ask me. I love the vibe that the geometric shapes add to the space and the room definitely feels like it’s got some personality happening now. I will for sure be expecting a lot of love songs to be written about me in this room from now on—I think it’s only fair, don’t you? xo. Laura
Credits // Author and Photography: Laura Gummerman. Photos edited with Stella from .